6-Foot Cedar Privacy Fence Built for Backyard Seclusion in Glen Burnie, MD
- Use
- Residential Backyard Privacy Fence
- Location
- Glen Burnie
- Project Title
- 6-Foot Cedar Privacy Fence Built for Backyard Seclusion in Glen Burnie, MD ft
- Service Type
- Privacy Fence Installation, Wood Fence Installation
Project Overview
The Challenge: Privacy on a Sloped, Tree-Filled Lot
This Glen Burnie backyard had two challenges: mature trees and uneven ground.
The homeowners wanted full privacy. They did not want to remove trees. They also needed the fence to follow the natural slope without looking uneven.
The goal was simple. Build a 6-foot cedar privacy fence that blocks sightlines, fits around existing tree trunks, and maintains clean structural lines across the entire property.
The Fence System: Cedar Boards with Pressure-Treated Framing
This project features a solid-panel cedar privacy fence designed for a full backyard enclosure.
Visible Materials
- Vertical cedar pickets with tight board spacing
- Three horizontal backer rails per section
- Square pressure-treated wood posts
- Flat-top design with no lattice or trim
- Solid construction for complete visual screening
The pressure-treated framing shows the light green tint typical of treated lumber. The cedar boards have a natural wood tone. Together, they create contrast between structural framing and privacy infill.
Each panel includes three evenly spaced support rails. The boards are installed tightly together, leaving no visible gaps.
Installation Method: Stepped Construction for Sloped Grade
The yard slopes from one side to the other. Instead of racking the panels, the fence was installed using a stepped method.
Each section remains level. The fence drops gradually in clean increments as the ground changes.
- Stepped panel transitions along the slope
- Straight horizontal top lines within each section
- Posts set below grade with concrete footings
- No visible concrete collars above ground
- Bottom of panels slightly elevated above grade
This approach keeps the fence visually straight while adapting to the terrain. It’s a practical method for many Glen Burnie properties with natural elevation changes.
Tree Integration: Built Around Existing Landscape
Several mature trees sit directly along the fence line.
Instead of cutting around them loosely, the panels were fitted tightly around the trunks. The boards maintain consistent spacing. The privacy line remains continuous.
- Fence sections wrapping around large tree bases
- Uniform rail spacing across long runs
- Continuous perimeter coverage
This preserves both privacy and the yard’s wooded character.
Residential Fence Height Guidelines in Glen Burnie and Anne Arundel County
The fence stands approximately 6 feet tall, which aligns with common residential backyard privacy heights throughout Glen Burnie and Anne Arundel County.
The result is a full perimeter enclosure designed for residential privacy.
The Result: Clean Lines. Solid Structure. Full Privacy.
The fence appears newly installed. The boards are straight. The rails are aligned. The panels follow the grade without distortion.
This 6-foot cedar privacy fence in Glen Burnie, MD, now provides:
- Complete backyard seclusion
- Strong structural framing
- Long, uninterrupted perimeter coverage
- A natural wood finish that complements the surrounding trees
Built for Maryland Homes That Value Privacy and Craftsmanship
Proudly serving Glen Burnie, Severn, and nearby Maryland neighborhoods with reliable, built-right fencing.
(443) 838-9374 • allaroundfenceanddecks.com
Request a Free Estimate.
×
![Zoomed Image]()
❮
❯